Conveyor Spray Paint Plant

Product Description

TECHNICAL SPECIFICATION FOR CONVEYOR

1) CHAIN                   Type   4 Wheel by planar chain

                                     Pitch: 6

                                     Breaking Strength: 4500 kg

                                     Allowable pull: 450 kg

                                     Wheels: Load wheel :47 OD x 14 Thick EN Series Through Hardened                      

                                     Guide Wheel: 47 OD x 14 Thick EN Series Through Hardened                      

                                     Links: 32mm x 4 mm Thick EN8

                                     Cruciform: 3mm cold formed and work hardened.

                                     Axle: Case hardened 55 to 58 RC

2) TRACK                  Cold formed angle track 5 mm thick with 4 mm thick track at every

                                     625 mm Brackets.      

3) Bends                      All horizontal and vertical bends are provided as per layout.

4) Drive unit               Caterpillar type.

                                     Motor: 2 HP, 1440 RPM TEFC Squirrel cage induction motor           

                                     class B insulation IP 44 protection, suitable for AC 3 phase

                                     415V, 50 HZ Make:( Bharat bijlee/ LHP/Equivalent)

                                     Gear Box: Double Stage Worm Reduction Gear box oil Cooled

                                     Make: Elecon/Equivalent

5) Tension unit           Screw type

6) Over load safety     Shear pin arrangement           

7) Painting                  The track will be coated with anti-rust primer paint.

8) Conveyor Length   38 Mtrs